Pleated hanging of an acoustic curtain: how to get the most out of a single layer
The same acoustic curtain can absorb sound much better – you just have to hang it the right way. Laboratory measurement showed that a single layer hung in deep folds reaches a weighted sound absorption coefficient of αw = 1.00, the highest possible value. Hung flat it has αw = 0.75. The difference is mainly in the bass and in how deep the folds are.
Why folds help
A pleated curtain puts more material across the same width of window or wall for the sound to hit. There is also air behind it and between the folds, in which low frequencies are damped better than by a thin layer hung flat. That is why folds help most in the bass: deep voices, bass guitar, drums or the hum of equipment.
What the laboratory measurement showed
The same single layer of acoustic material measured twice in a reverberation room: once hung flat and once in deep folds. The chart and the table show what percentage of incident sound it absorbs at each frequency. 100 % means it absorbs everything.
| Frequency | Hung flat | Hung pleated |
|---|---|---|
| 125 Hz (deep bass) | 13 % | 39 % |
| 250 Hz (bass, deep voice) | 44 % | 84 % |
| 500 Hz (speech) | 86 % | 90 % |
| 1,000 Hz and above | 85–100 % | 96–100 % |
| αw according to EN ISO 11654 | 0.75 | 1.00 |
In the mids and highs a single layer absorbs well even when hung flat. The folds add most where it is hardest – in the bass: at 250 Hz almost twice as much.
How deep the folds must be
This is the most common mistake. A few small ripples in stretched fabric will not change the result. In the measurement the curtain was hung like this:
- hung width 2.6 m, made from 5.5 m of fabric, i.e. about 2× fullness,
- 6 folds, each about 44 cm wide and 30 cm deep,
- the curtain hung about 7.5 cm from the wall.
In practice: plan for roughly twice the width of the window or wall. For a 1.5 m wide window that means curtains with a total width of about 3 m. Choose a rail or rod that stands off the wall, so there is air behind the curtain and the folds have room to form.
A single layer pleated, or a double layer flat?
Both have αw = 1.00. A single layer in deep folds even absorbs slightly more in the bass (84 % vs. 75 % at 250 Hz). A double layer hung flat absorbs practically everything from 400 Hz upwards and needs only as much fabric as the window is wide.
- Have the space and want the most bass absorption for a reasonable price? A single layer, hung in folds.
- Want the curtain flat, or have no room for folds? A double layer.
Data source: laboratory measurements by Riverbank Acoustical Laboratories (USA, NVLAP accreditation, ISO/IEC 17025), reports RAL™-A12-119 (flat), RAL™-A13-161 (pleated) and RAL™-A19-502 (double layer). The αw values were calculated by VocalBoothToGo-EU s.r.o. according to EN ISO 11654. Details are in the certificates for the single layer and the double layer.
Browse acoustic curtains and accessories for hanging them. Acoustic curtains · Accessories.
Related options: Flexible Ceiling Track kit (4 Meters) – for 2 sound blankets · Flexible Ceiling Track kit (2 Meters) – for 1 sound blankets · Hook for hanging acoustic blankets and acoustic curtains.