Mobile Sound Booth 6×6 with Double-Wall Soundproofing with EU plug
The NEW 2019 Enhanced SPB662 model blocks more sound than ever, with an additional layer of a limp-mass sound barrier and an improved DOUBLE sound absorbing layer to make your recordings sound crisp and clear. The booth is able to comfortably fit multiple people with their equipment, for practicing singing, musical instruments, voice over recordings, audiometry testing, and much more! The Enhanced Sound Isolation Booth, SPB662 measures approximately 80 inches tall x 80 inches wide x 90 inches long and can be transported in a passenger car with an assembly time of 20-30 minutes!
Lightweight aluminum frame is easy to assemble and disassemble without need for any tools or screws etc. All poles are of the same size to make assembly easy.
Sound blocking panels connect in a very tight fashion to prevent sound leaks.
Soundproof panels and Double thick sound absorption panels can be rolled and stored in the provided transport bags.
Included LED lights (2 lights per booth) provide sufficient illumination and no noise or extra heat.
Booth has a door panel with Zipper closure and a clear vinyl window. Internal sound absorbing panels do not have a window built-in to reduce the number of reflective surfaces.
When the booth is disassembled it fits into five bags. Full bag size is approximately 42 inches long x 16 inches wide and tall.
The bags are specially designed with additional secure straps inside and strong zipper to keep sound panels together. Since the sound proof panels are very heavy, the bags are designed to hold considerable weight. We also provided 4 handles, so two people can carry it.
The Enhanced SPB662 can comfortably fit multiple individuals, a table and chairs, instruments, or for a drum set.
Internal sound absorbing panels create a great acoustic environment for audio recording. Outer Soundproof panels reduce the sound by a whopping 32 dB at mid-range and even more, up to 45dB at high frequency sound.
Soundproofing walls are made out of specially constructed multilayered soundproof panels containing reinforced Limp Mass Membrane (STC 33) to block the sound transmission and a sound-absorbing layer of felt to reduce the sound reflections inside the booth.
NOTE: Limp Mass property of the wall panels increase soundproofing capacity compare to the material of the same weight but in rigid form. Sound absorption panels are made out of Producer’s Choice for superior booth acoustics (NRC 0.8, or 80% noise reduction).
In assembled state outer sound proofing walls are joined together with zipper with special sound blocking flaps to seal the corners. This SPB662 can comfortably fit into an apartment with average ceiling height.
- Assembled Size: 80 inches long x 80 inches wide and 90 inches high (at the pitched point).
- Soundproofing Walls STC 33
- Sound Absorbing panels NRC -0.8
- Weight – 1550 lbs.
- Frame Aluminum. Connectors steel.
- 10 Black Duffel Bags to Store and Carry Booth
- Vibration Cancelling Floor Mats with Soundproof layer in 4 boxes
Assembly. The booth features a lightweight aluminum frame. with pitched roof. The fame itself is easy to assemble, but with the addition of the swing door feature, assembly of the door frame part got a little complicated, so WE STRONGLY RECOMMEND TO FOLLOW INSTRUCTIONS. (Not following assembly instructions will result in unnecessary waste of time and frustration.)
Please note: booths can take up to 5 business days to ship out.