Door lock hole (NovaLite, LiteSilence)
If you want to add a lock cut-out (40 mm diameter) to our LiteSilence or NovaSilence products, follow these steps: Measure the distance from the bottom edge of the door to the center of the opening where the key is inserted and enter this value in the product configurator under the field marked (F). Then measure the distance from the side edge of the door to the center of the opening for key and enter this value in the product configurator under the field marked (E). Note: Measurements must be taken carefully and accurately – once the cut-out is produced, its position cannot be changed. More
If you want to add a lock cut-out (40 mm diameter) to our LiteSilence or NovaSilence products, please follow the steps below:
-
Measurement (F):
- Measure the distance from the bottom edge of the door to the center of the opening where the key is inserted.
- Enter this value in the product configurator in the field marked (F).
-
Measurement (E):
- Measure the distance from the side edge of the door to the center of the opening for key.
- Enter this value in the product configurator in the field marked (E).
Note: Measurements must be taken carefully and accurately – once the cut-out is produced, its position cannot be changed.